Two Years Two Days - Bootcamp and other stuff

TEst

2007-11-15T18:43:00.001Z

Size Chart

Jeans	30	32	34	36	38	40
Length	32	32	32	34	34	34

Crews	S	M	L	XL	XXL	XXXL	XXXXL
Chest	42	44	46	48	50	52	54

Hoodies	S	M	L	XL	XXL	XXXL	XXXXL
Chest	44	46	48	50	52	54	56

Tees	S	M	L	XL	XXL	XXXL	XXXXL
Chest	40	42	44	46	48	50	52

Jackets	S	M	L	XL	XXL	XXXL	XXXXL
Chest	46	48	50	52	54	56	58

Knits	S	M	L	XL	XXL	XXXL	XXXXL
Chest	42	44	46	48	50	52	54

Tracktops	S	M	L	XL	XXL	XXXL	XXXXL
Chest	42	44	46	48	50	52	54

Polos	S	M	L	XL	XXL	XXXL	XXXXL
Chest	40	42	44	46	48	50	52

Underwear (Mens)	S	M	L	XL
Waist	28-30	30-32	32-34	36+

Underwear (Womens)	S	M	L
Size	8	10	12

Caps	6 1/2	6 5/8	6 3/4	6 7/8	7	7 1/8	7 1/4	7 3/8	7 1/2	7 5/8	7 3/4	7 7/8	8
Cm	52	53	54	55	56	57	58	59	60	61	62	63	64
Inches	20 1/2	20 7/8	21 1/4	21 5/8	22	22 3/8	22 3/4	23 1/8	23 1/2	23 7/8	24 1/4	24 5/8	25

2007-11-15T18:12:00.001Z

Size Chart

Jeans	30	32	34	36	38	40
Length	32	32	32	34	34	34

Crews	S	M	L	XL	XXL	XXXL	XXXXL
Chest	42	44	46	48	50	52	54

Hoodies	S	M	L	XL	XXL	XXXL	XXXXL
Chest	44	46	48	50	52	54	56

Tees	S	M	L	XL	XXL	XXXL	XXXXL
Chest	40	42	44	46	48	50	52

Jackets	S	M	L	XL	XXL	XXXL	XXXXL
Chest	46	48	50	52	54	56	58

Knits	S	M	L	XL	XXL	XXXL	XXXXL
Chest	42	44	46	48	50	52	54

Tracktops	S	M	L	XL	XXL	XXXL	XXXXL
Chest	42	44	46	48	50	52	54

Polos	S	M	L	XL	XXL	XXXL	XXXXL
Chest	40	42	44	46	48	50	52

Underwear (Mens)	S	M	L	XL
Waist	28-30	30-32	32-34	36+

Underwear (Womens)	S	M	L
Size	8	10	12

Caps	6 1/2	6 5/8	6 3/4	6 7/8	7	7 1/8	7 1/4	7 3/8	7 1/2	7 5/8	7 3/4	7 7/8	8
Cm	52	53	54	55	56	57	58	59	60	61	62	63	64
Inches	20 1/2	20 7/8	21 1/4	21 5/8	22	22 3/8	22 3/4	23 1/8	23 1/2	23 7/8	24 1/4	24 5/8	25

Fixing windows OSX bootcamp time issue

2006-05-31T10:42:00.000+01:00

I found this solution on a forum posted by "josmul123" here

*** WARNING: Editing your registry improperly can render your Windows installation inoperable. Proceed VERY carefully. I am not responsible if you mess something up. ***

The short solution for people who know how to edit the registry:
A DWORD key called

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSetControl\
TimeZoneInformation\RealTimeIsUniversal

needs to have the value of "1"

The step-by-step solution is as follows:
1. Boot Windows

2. Click Start --> Run and type regedit. Click OK

3. The Windows Registry Editor should pop up. Navigate within the explorer to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
then to:

Control\TimeZoneInformation

4. Click on the TimeZoneInformation "folder" from the navigation pane if you haven't already done so.

5. This assumes the correct key doesn't exist. If it does, you will just change the existing key's value: Right click on the white space within the folder (If you don't have a right mouse button, you may need to download a program called applemouse to emulate the "control-click" of the apple 1-button mouse). Select new --> DWORD Value. Title the key "RealTimeIsUniversal" (No quotes). Set the value to "1" (No quotes again). Hexidecimal should be fine.

6. Either reboot and set the clock in MacOS or set the clock in Windows. You should now be able to reboot into either OS and have a correct clock.

Bootcamp, sharing data between OSX and XP with 3 partitions - Advanced

2006-05-18T21:18:00.000+01:00

This is how to install bootcamp and end up with one OSX Partition (NFS+), one XP partition (the preferred NTFS system) and one shared MS-DOS Fat32 Data partition that both operating systems can read/write to.

The detailed instructions ended up being way longer than expected, so here’s a short version for experienced users.

(A detailed version for newbie's is in the previous post)

-------------------------------------------------------------------------
1) Ensure you have OSX installed one 1 partition only (ie you have not partitioned with Bootcamp) reinstall if you have to

2) Run bootcamp

DO NOT PARTITION WITH BOOTCAMP

3) Create the Driver disk

4) In terminal window type ‘diskutil list’, note the OSX disk name.

5) Run the following (the OSX partition, Data & XP partition MUST be in this order)

sudo diskutil resizeVolume disk0s2 21G "HFS+" Data 50G "MS-DOS FAT32" XP 21G

Change ‘disk0s2’ for the name of your disk.
Change the sizes to suit your disk.

(The trick with this install is to format the ‘Data’ volume to be a format that windows doesn't recognize during install, hence the data volume is "HFS+" volume, trust me)

6) Insert the Windows XP (ensure you have serial number)

7) Reboot and hold down “C” to select the windows CD

8) Install windows (formatting volume to NTFS. Halfway through it will reboot, use the option key as it reboots AND reselect the windows CD.

9) After Windows has installed, swap the CD's so OSX Install Disk is back in the drive.

10) Reboot and hold "C" to boot into the OSX set up.

11) Using Disk Utility (Utilities menu) select the 'Data' partition, select "MS-DOS FAT32" from the drop down and click 'Erase'

-------------------------------------------------------------------------

That’s it.

When you boot into Windows you will have the C: drive (NTFS) with windows installed and the Data drive (FAT32) (G: in my system) with full access.

In OSX you will see two windows drives, one shared Data drive with full access, one with Win XP on it.

The only limitation is that individual files cannot be over 4gb in the shared drive, not a problem for me.

Any problems try reading the detailed description

Bootcamp, sharing data between OSX and XP with 3 partitions - Detailed (Long!) Version

2006-05-18T20:20:00.000+01:00

This is how to install bootcamp and end up with one OSX Partition (NFS+), one XP partition (the preferred NTFS system) and one MS-DOS Fat32 Data partition that both operating sytems can read/write to.

If you have already set up bootcamp you will probably have to reformat and start again, these instructions assume that you are going to do a clean/fresh re-install.

If you have not installed bootcamp/xp and are happy with your OSX install then you can skip the first section, you wont lose any of your data.

These instructions ended up being way longer than expected, there is an cut down version for advanced users above.

These are full instructions for users who have no experience of windows or OSX, these are for the MacBook Pro but I'm pretty sure they will be exactly the same for all intel macs.

-------------------------------
Re-installing OSX to original state (skip this if you only have osx and haven't installed bootcamp.)

. Insert OSX Disk 1
. Boot the system, after the 'ding' sound press and hold the "C" key until the Grey Apple logo appears.
. Select your language, on the next 'Welcome to the Mac os X Installer screen click 'Contiune'.
. Select your destination disk, ensure there is only one disk here, if not partition your disk to one partition using Disk Utility (from the top menu)
. If you want to erase your data then select 'Options' - Select 'Erase and Install' - 'Continue'.
. Choose your install options, if you select Customise then you can choose to just install the Base System (without all the bundled software).
. When finished you will be booted into OSx
-------------------------------

. Boot into OSX, install all software and firmware updates. (System Preferences - Software Update)
. Copy/Download Bootcamp
. Double click the .dmg file
. A new window opens, click the BootCampAssistant.pkg file.
. Select Destitation - Next - Continue
. If you have not created the Apple Drivers CD for Windows XP then go to HDISK/Applications/Utilites/Bootcamp Assistant, Create the CD, BUT DO NOT CONTINUE AND PARTITION YOUR DISK, exit from BootCamp Assistant

! DO NOT PARTITION YOUR DISK HERE USING BOOTCAMP ASSISTANT!

We then create the 3 partitions:

. Goto HDISK/Applications/Utilites/Terminal
. type 'diskutil list'
. Press enter

You should see something like this:

Last login: Wed May 17 10:35:23 on console
Welcome to Darwin!
rich-greens-computer:~ richgreen$ diskutil list
/dev/disk0
#: type name size identifier
0: GUID_partition_scheme *93.2 GB disk0
1: EFI 200.0 MB disk0s1
2: Apple_HFS HD 92.8 GB disk0s2
/dev/disk3
#: type name size identifier
0: Apple_partition_scheme *144.7 MB disk3
1: Apple_partition_map 31.5 KB disk3s1
2: Apple_Driver_ATAPI 4.0 KB disk3s2
3: Apple_HFS Boot Camp Assistant 144.6 MB disk3s3

Note the name of /dev/disk0 volume 2 (it will more than likely be disk0s2 as here)

Then type the following :

sudo diskutil resizeVolume disk0s2 21G "HFS+" Data 50G "MS-DOS FAT32" XP 21G

NOTE: you have to adjust the above line to suit your system, the numbers must add up to the size of your disk (not exactly though) I have the 100G disk, it works out to be 92.8Gb.
I have set aside 21G for OSX, 50G for the shared data named "Data" and 21G for XP named "XP"

To get this to all work you have to first format the shared volume to be a format that windows doesn't recognise, hence the "HFS+" volume, trust me.

Press enter

You should see a screen like this:

****************
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:

#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.

Password:
****************
enter your password (or leave it blank for no password) press enter

You should see the following:

Started resizing on disk disk0s2 HD
Verifying
Resizing Volume
Adjusting Partitions

Finished resizing on disk disk0s2 HD
You will need to manually reformat your new partitions.
WARNING: You must now reboot!

Eject the osx disk and insert the Windows XP one (before you do this ensure you have the serial number to hand and its not on the disk!)

Reboot

As it reboots as soon as it 'beeps' hold the "C" key.

Windows install should start

To set up windows press 'Enter'
F8 to agree with license

Select the last partition "D" format this NTFS (quick is fine)

As windows installs it will reboot.

Just after it reboots and you here the 'beep' hold the option key down (the alt key next to the left apple one)

You should see two hard disks icons and one CD icon, select the CD one.

Windows continues to install

When finished you should be booted into windows, you can now install the drivers from the CD you created earlier, or skip it and do it later.

After Windows has installed, swap the CD's so OSX Install Disk is back in the drive, to eject the CD in windows, go Start - My Computer. Select the CD and in the left hand menu yo should see 'Eject'

Reboot and hold "C" after the beep to boot into the OSX set up.

Using Disk Utility from the 'Utilities' menu, Select the 'Data' partition (the second one in the list), select "MS-DOS FAT32" from the drop down and click 'Erase'

That's it, phew.

UK AOL Broadband without AOL Software with AOL Broadband 200 Modem

2006-05-18T17:49:00.000+01:00

This is really straight forward in XP, I use the network connection but if you are using USB you will have to install the drivers first.

This also works for the BT Voyager modem that BT supplies.

After setting this all up you can use the Windows Internet Connection Sharing (ICS) to share your internet or make it wireless.

1) Go Start - Connect to - Show all connections

2) In Networks Tasks (Left hand panel) choose 'Create a new connection' - Click Next

3) Choose 'Connect to the Internet'- Click Next

4) Choose 'Set up my connection manually' - Click Next

5) Choose 'Connect using a broadband connection that requires a username and password' -
click Next

6) Type anything you want in ISP Name like 'AOL Sucks'

7) User name is your AOL username + aol.com like 'MrSmith@aol.com'

8) Password, YOUR PASSWORD MUST BE 8 CHARACTERS OR LESS, if you need to set up a new screen name.

9) It's up to you if you select 'Use this account name and password.." and 'Make this the default Internet Connection' - Click Next

10) Choose 'Add a shortcut to my desktop' (optional) - Click Finish

To connect just double click the desktop shortcut.

I got this to work fine on my MacBookPro under OSX too, that was pretty straight forward too.